Three Fogging Test Methods for Automotive from Labthink

Materials used in vehicles, such as plastics, fabrics, rubber or leathers, will evaporate under high temperatures and condense on the windshield and create a fog, which causes dangerous driving conditions. Fogging test is right to measure fogging characteristics of these automotive interiors as well as HID lamps.

Three Fogging Test methods

• Gloss Method

the specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value could be obtained by calculating and comparing the gloss values occurred before and after condensation process.

• Haze Method 

the specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value of the specimen could be obtained by calculating and comparing the fogging values occurred before and after condensation process.

• Weighing Method 

the specimen is heated in the beaker and its volatile constituents are condensed on the cooling aluminum foil. The fogging value - the weight of condensed constituents could be obtained by analyzing the weight changes of aluminum foil occurred before and after condensation process.


FT-F1 Fogging Tester, designed and manufactured by Labthink Instruments Co., Ltd, is right designed for the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts, e.g. plastic articles, polyurethane, textiles, leather, adhesives, nonwovens and thermal forming elastomers at high temperature conditions. It also could be used for the fogging phenomenon test of high intensity discharge (HID) headlamps of cars.

This fogging tester is equipped with wide Wide range and high precision of temperature control device, which supports the combinations of non-standard test conditions 
  

More info about fogging test, please contact Labthink via 531-85060139.